synth_tools

Back

After tweaking footprints some more, starting over at 14hp Added hard sync to schematic, laid out PCB with on-board antenna Class 2 Bluetooth Module without antenna Low-Power Long Range LoRa Transceiver Module LoRa Radio, RF, Module, http://www.hoperf.com/upload/rf/RFM69HW-V1.3.pdf 8 pin SIM connector for PCB's with 30 contacts (polarized Highspeed card edge connector for PCB's with 70 contacts (not polarized Highspeed card edge connector for PCB's with 50 contacts (not polarized Highspeed card edge connector for PCB's with 50 contacts (polarized Highspeed card edge connector for 2.4mm PCB's with 08 contacts (polarized Highspeed card edge connector for 1.6mm PCB's with 05 contacts (not polarized Highspeed card edge connector for PCB's with 05 contacts (polarized Highspeed card edge connector for 2.4mm PCB's with 70 contacts (not polarized Highspeed card edge connector for 1.6mm PCB's with 08 contacts (not polarized Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm Highspeed card edge connector for PCB's with 40 contacts (polarized Highspeed card edge connector for 2.4mm PCB's with 05 contacts (polarized Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf conn samtec card-edge high-speed Highspeed card edge connector for 1.6mm PCB's with 50 contacts (polarized Highspeed card edge connector for panel, 90° PCB mount 4 pin, 2.0mm square SMD pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 2 pin, 0.3mm round THT pads Net tie, 2 pin, 0.5mm square SMD rectangular pad as test Point, diameter 4.0mm Plated Hole as test Point, square 2.0mm side length SMD rectangular pad as test point, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00021 pitch 5mm size 25x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type701_RT11L03HGLU, 3 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2410, 24 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator JST ZE series connector, B14B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py Texas QFN, 14 Pin (JEDEC MO-153 Var CA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator Hirose series connector, 78171-0004 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.3mm, height 8, Wuerth electronics.

New Pull Request

Labels Milestones