synth_tools

Back

Type-2 TO-220-7, Vertical, RM 2.54mm, staggered type-1 TO-220-7 Horizontal RM 5.45mm TO-46-2, Pin2 at center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf TO-92 leads molded, narrow, drill 0.75mm, hand-soldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf TO-92L Molded Wide transistor TO-92Mini package, drill 0.6mm (https://media.digikey.com/pdf/Data%20Sheets/Infineon%20PDFs/KT,KTY.pdf TO-92S package, 2-pin, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot337-1_po.pdf SSOP16: plastic shrink small outline package; 28 leads; body width 3.9 mm; lead pitch 0.635; (see http://cds.linear.com/docs/en/datasheet/38901fb.pdf 28-Lead Plastic Shrink Small Outline Narrow Body (QR)-.150" Body [QSOP] (http://www.allegromicro.com/~/media/Files/Datasheets/ACS726-Datasheet.ashx?la=en Allegro Microsystems SIP-3, 1.27mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/A1363-Datasheet.ashx Diodes SIP-3 Ammo Pack Miniature Wired Open-Loop Current Sensor LEM CKSR 6/15/25/50/75-NP Current Transducer, https://www.lem.com/sites/default/files/products_datasheets/cksr_75-np.pdf LEM HO 40/60/120/150-NP Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/la_25-p.pdf LEM current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf LEM Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/ho-np_0100__1100_series.pdf LEM HTFS x00-P current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf LEM HX20-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf LEM HX50-P-SP2 hall effect current transducer LEM_LTSR-NP 5V supply voltage series https://www.lem.com/sites/default/files/products_datasheets/ltsr_6-np.pdf DFN, 4 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/DSC60XX-Ultra-Small-Ultra-Low-Power-MEMS-Oscillator-DS20005625C.pdf), generated with kicad-footprint-generator connector Harting har-flexicon horizontal Harting har-flexicon series connector, B8B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 56 Pin (http://intantech.com/files/Intan_RHD2000_series_datasheet.pdf#page=38), generated with kicad-footprint-generator JST PH series connector, B14B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with StandardBox.py) (https://www.bourns.com/docs/Product-Datasheets/SRF1260.pdf Bourns SRP1245A series SMD inductor Inductor, Bourns, SRF1260, 12.5mmx12.5mm (Script generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xx-DV-PE-LC, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator connector wire 1sqmm double-strain-relief Soldered wire connection, for 5 times 2 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 1.19mm, 5 to 200 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf Shunt Resistor SMD 2816 (7142 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times 0.75 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 1.7mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-8-5.08, 8 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-5-5.0-H, 5 pins, pitch 10mm, size 15x10.3mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10688 pitch 3.5mm size 18.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00085, vertical (cable from top), 11 pins, pitch 3.5mm, size 29x8.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf.

New Pull Request

Labels Milestones