Labels Milestones
BackPoint 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314 Keystone Miniature THM Test Point 5010-5014, http://www.keyelco.com/product-pdf.cfm?p=1319 SMT Test Point- Micro Miniature 5015, http://www.keyelco.com/product-pdf.cfm?p=1353 SMT Test Point- Micro Miniature 5015, http://www.keyelco.com/product-pdf.cfm?p=1353 SMT Test Point- Micro Miniature 5015, http://www.keyelco.com/product-pdf.cfm?p=1353 SMT Test Point- Micro Miniature 5019, http://www.keyelco.com/product-pdf.cfm?p=1357 wire loop with bead as test Point, diameter 3.0mm z-position of LED center 1.0mm, 2 pins, diameter 3.0mm z-position of LED center 1.0mm 2 pins diameter 5.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 3.0mm 2 pins C1: enlarge footprint; a box film cap instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0 A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel: mini toggle: 4mm above panel, tight but possible micro toggle: probably too short without extra spacers, use mini toggle switch - this needs measuring, and leaving space for a single 0.25 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 1.7mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Resistor SMD 1218 (3246 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator JST XH series connector, LY20-18P-DLT1, 9 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 5268-02A, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_7.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0610, with PCB locator, 13 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator connector Hirose DF13 through hole, DF11-16DP-2DSA, 8 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-1230, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator Soldered wire connection, for 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py USON, 6 Pin (https://www.jedec.org/sites/default/files/docs/Mo-178c.PDF variant AA), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1 mm² wire, reinforced insulation, conductor diameter 0.48mm, outer diameter 1.5mm, hole diameter 0.9mm wire loop as test Point, square 3.0mm.