Labels Milestones
BackAt https://www.gme.cz/data/attachments/dsh.511-795.1.pdf LED automotive super flux 7.62mm LED_SideEmitter_Rectangular, Rectangular, SideEmitter, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm, 2 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00296, 11 pins, pitch 5mm, size 45x9mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-15-3.5-H, 15 pins, pitch 5mm, size 35x12.6mm^2, drill diamater 0.7mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-9-5.0-H, 9 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST XH series connector, 78171-0003 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.15 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-13-5.08, 13 pins, pitch 2.5mm, size 22.2x10mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00006, 7 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00049, 6 pins, pitch 5mm, size 40x9.8mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type086_RT03405HBLC pitch 3.81mm length 9.5mm diameter 5.2mm Diode, DO-201AE series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*26mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 22.00mm length 27mm width 9mm Alps rotary encoder, PEC09, without switch, vertical shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf Bourns rotary encoder, EC12E..., vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html Alps rotary encoder, EC12E... With switch, vertical shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf Sensortech MiCS MEMS sensor Infineon, IP57, XENSIV, LGA-5, https://www.infineon.com/dgdl/Infineon-IM73A135-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7f2a768a017fadec36b84500 MEMS Microphone LGA Dust Water TDK InvenSense MEMS I2S Microphone: https://invensense.tdk.com/products/ics-43434/ microphone MEMS I2S SPH0645LM4H Knowles Sensirion, SHT40, SHT41, SHT45, DFN, 4 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12884&prodName=TLP291), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 32 Pin (https://www.st.com/resource/en/datasheet/stm32g071k8.pdf), generated with kicad-footprint-generator Harwin Female Vertical Surface Mount Common Mode.
New Pull Request