synth_tools

Back

FFC/FPC connector Pitch 0.5mm VSSOP DCU R-PDSO-G8 Pitch0.5mm VSSOP-8 3.0 x 3.0 VSSOP, 10 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001725D.pdf (Page 12)), generated with kicad-footprint-generator Molex SPOX Connector System, 5267-07A, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002142A.pdf#page=40), generated with kicad-footprint-generator Soldered wire connection, for 4 times 0.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0161, 16 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-BE-A, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.25 mm² wire, reinforced insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/20223.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00082 vertical pitch 3.5mm size 46.2x7mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf LED diameter 5.0mm z-position of LED center 3.0mm, 2 pins LED, diameter 3.0mm, 2 pins LED diameter 3.0mm Plated Hole as test Point, square 1.0mm side length, hole diameter 0.5mm test point THT pad as test point, pitch 2.0mm, hole diameter 0.9mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator connector wire 0.5sqmm double-strain-relief Soldered wire connection with feed through strain relief, for a 5mm led, with a work based on this and/or Hagiwo's quantizer, if going digital ** https://note.com/solder_state/n/nde97a0516f03 and https://www.youtube.com/watch?v=op_DhPr2goc ** arduino nano clone (atmega 328p), 12-bit dac (mcp4726) and small amounts of supporting hardware Microcontroller and smoothed PWM https://kassu2000.blogspot.com/2019/10/quantizer.html using a setscrew).

New Pull Request

Labels Milestones