Labels Milestones
BackStep IDs with a full bridge rectifier; could use larger spacing on the top edge or circumference using cones or cylinders arranged in a separate module? If possible? Full unit is ~$8.50 - $10 in parts, needing only one cross-board wire that shouldn't be so hard. - In general, try to avoid multiple triggers on each Could replace step IDs with a rock/reggae rhythm on the footprint. Some options: Bourns PTL series, such as: https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft ** https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft * https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft) .
- D="M 0,0 H 167 V 458.
- 22 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator.
- Header, 1x23, 2.54mm pitch, single row style2.
- Q5 R1, R2, R23.