synth_tools

Back

Https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft ** https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M * The SPDT toggle switch ON-ON | | J1 | 1 | Conn_01x10 | Pin socket, 2.54 mm, 1x4 | | R25 | 1 | LED | Light emitting diode | Tayda | A-3186 | | | | | | R24, R26, R28 | 4 .../precadsr-Edge_Cuts.gbr | 16 .../precadsr_aux_Gerbers/precadsr-F_Cu.gbr | 580 .../precadsr_aux_Gerbers/precadsr-F_Mask.gbr | 185 .../precadsr_aux_Gerbers/precadsr-B_Paste.gbr | 4 | 100 nF | Unpolarized capacitor | | | | | | | | | | R8, R10, R12 | 3 Hardware/PCB/precadsr/precadsr.sch | 1867 Hardware/PCB/precadsr/precadsr.xml | 1557 Hardware/PCB/precadsr/sym-lib-table | 2 | 1M | Resistor | | | | | | | | Knobs | | C6, C7, C8, C9 D1, D2, D3, D4, D5, D8, D9, D10 100V 0.15A standard switching diode, DO-35 Schottky Barrier Rectifier Diode, DO-41 | | | | Tayda | A-962 | | | Tayda | A-4755 | | J7 | 1 | B10k | **Potentiometer, 9 mm or 16 mm vertical board mount. \*\* Use only four (4) potentiometers, either 9 mm pots, you're on your own! The jacks, like the SPDT toggle.\* In that case the pots and the coarse knob to fix tuning range Add 55k-ish resistor to coarse knob (doublecheck this placement). Actual value unclear (see below).

Argument for a single 1.5 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter.

New Pull Request

Labels Milestones