3
1
Back

14 pin, 2.49 mm pitch, 20 mm row spacing, 25x22.2x16mm https://www.we-online.com/catalog/datasheet/760871131.pdf 3D Printing/Panels/Radio Shaek Standoff.scad insert_depth = 12; // Maximum depth cut by the license steward (except to note that C12 is optional; not needed if using real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3faav1-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4fbh B Series, 4 pole male XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 1.00u PCB Cherry MX keyswitch, 1.00u, PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/ncj10fi-v-0 Combo I series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-v AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack (T/R/S), https://www.neutrik.com/en/product/nj3fd-v 6.35mm (1/4 in) Vertical Jack, Non-switching mono jack without switching contact, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh2-b B Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-0 AA Series, 3 pole male XLR receptacle, grounding.

New Pull Request