Labels Milestones
Back502386-1370 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py LGA, 14 Pin (https://www.onsemi.com/pub/Collateral/FUSB302B-D.PDF#page=32), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-LC, 28 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-LC, 43 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator ipc_noLead_generator.py WSON, 8 Pin (http://www.allegromicro.com/~/media/Files/Datasheets/A4950-Datasheet.ashx#page=8), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 24 Pin (http://www.ti.com/lit/ds/symlink/bq25601.pdf#page=54), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1330, 13 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for a full threaded nose, https://www.neutrik.com/en/product/nrj4hf Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd2 M Series, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf Slim Jacks, 6.35mm (1/4in) switching stereo jack, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fah1-da A Series, 5 pole male XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbhl-b B Series, 4 pole male XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbv-b B Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3maah-1 AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, tight but possible mini toggle: 2.5mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle switch | | J8 | 1 | 100k | Resistor | | J1 | 1 | SW_Push | Push button switch, normally closed, generic.
New Pull Request