Labels Milestones
BackConnector, M20-89009xx, 9 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator Connector Phoenix Contact, SPT 5/6-V-7.5-ZB 1719354 Connector Phoenix Contact, SPT 2.5/8-H-5.0-EX 1732441 Connector Phoenix Contact, SPT 1.5/3-H-3.5 1990740 Connector Phoenix Contact SPT 1.5/6-H-3.5 Terminal Block, 1990795 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990795), generated with kicad-footprint-generator Molex Pico-Clasp series connector, 78171-0004 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator Capacitor SMD 2220 (5650 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-A, 32 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-TE, 33 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 2.21mm, 1 to set output voltages. (10 One potentiometer per step, to enable/disable gate per step. (10 One potentiometer for internal clock rate. One SPDT switch per step, to set output voltages. (10) One potentiometer per step, to set output voltages. (10 One SPDT switch to disable the clock, and a momentary-on button to run once - Pause CV In - diode to U2-3 Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small for a single 1 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex.
New Pull Request