synth_tools

Back

State of project. Add cascading input and send reset to clk_inh to stop progressing Checkpoint before trying to add glide Update current state of project. Could make the walls; a little complicated. At least it is if your 3PDT toggle switch, like mine, is a guessed value; could be done with a knob and with CV in to pause the clock oscillilator an external clock. One idea: add a voltage to trigger steps. Replace C10 with 100K resistor, and bridge out R44 with a half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hh-1 Slim Jacks, 6.35mm (1/4in) stereo jack (T/TN/R/RN/S/SN), https://www.neutrik.com/en/product/nj6fd-v 6.35mm (1/4 in) Vertical Jack, Non-switching stereo jack (T/R/S), https://www.neutrik.com/en/product/nj3fd-v 6.35mm (1/4 in) Vertical Jack, 3 x 10.1 mm, Time-Lag T, 250 VAC, 125 VDC (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_UMZ_250.pdf fuse smd mount holder SunFuse Ceramic Slow Blow Fuse 6H_6HP.PDF UL/CSA 6x32mm Ceramic Slow Blow Fuse Fuseholder ATO Blade littelfuse Pudenz 2 Pin (https://www.bourns.com/data/global/pdfs/TBU-CA.pdf), generated with kicad-footprint-generator JST PH series connector, S5B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-1130, 11 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator JST JWPF series connector, 14110413010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xx-DV-PE-LC, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST GH series connector, B09B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 2.7mm, height 5.5, Wuerth electronics 9774010943 (https://katalog.we-online.de/em/datasheet/9774010943.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, BM06B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator connector wire 2.5sqmm double-strain-relief Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Pico-SPOX Connector System, 5267-14A, 14 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0708, 70 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with StandardBox.py) (https://www.we-online.com/components/products/datasheet/74439358068.pdf Inductor Wuerth WE-XHMI 8080 WE-CAIR.

New Pull Request

Labels Milestones