Labels Milestones
BackBattery CR-2450 coin cell vertical Cherry MX keyswitch, 1.75u, PCB mount, https://www.neutrik.com/en/product/nc4fbh B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl-0 A Series, Chassis connector H female (A series layout), horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-h Combo I series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fi-h-0 Combo I series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-v-da Combo A series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fa-v-0 Combo A series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible mini toggle: ample space above 11.75mm (existing 1p12t rotaries, use 11.25mm holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 15-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.41x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 37-pin D-Sub connector horizontal angled 90deg THT female pitch.
New Pull Request