synth_tools

Back

Square Low-profile Type (Surface Mount) SKQG Series, Without stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAEE010.html TL3305 Series Tact Switch Low-profile SMD Tactile Switch, https://www.e-switch.com/system/asset/product_line/data_sheet/165/TL3342.pdf SWITCH SMD KSA SW 4-bit rotary coded switch, gull wing, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf 4-bit rotary coded switch, through-hole, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf SPST Off-On Pushbutton, 1A, 30V, CW Industries P/N GPTS203211B, http://switches-connectors-custom.cwind.com/Asset/GPTS203211BR2.pdf SPST button switch OFF-(ON) | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-1605 | \* Fit SIP socket only if you are happy with your fetcher, use the two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm, 2 pins, pitch 5mm, size 62.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, S4B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 24 Pin (https://www.ti.com/lit/ds/symlink/tlc5949.pdf#page=49), generated with kicad-footprint-generator JST XH series connector, 502443-0370 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-11-5.08, 11 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR vertical pitch 5mm size 35x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00057 45Degree pitch 5mm size 55x7.6mm^2 drill 1.3mm pad 2.5mm terminal block pitch 5.0mm 4-lead round diode bridge package, diameter 9.8mm, pin pitch 5.00mm 7.50mm diameter 16.0mm width 5.0mm Capacitor C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 15.00mm length 16.5mm width 7mm Capacitor C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.5*4.6mm^2, Neosid, SD75, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd75.pdf Inductor Radial series Radial pin pitch 23.10mm diameter 24.1mm Bourns 2200 L_Toroid, Horizontal series, Radial, pin pitch=10.00mm, , length*width=11.5*4.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 22.50mm length 24mm width 16.3mm muRATA 5200 L_CommonMode_Toroid, Vertical series, Radial, pin pitch=6.00*6.00mm^2, , length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.7mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf Inductor Radial series Radial pin pitch 5.08mm size 10.2x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00308 pitch 10mm size 92.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-302 45Degree pitch 5mm Varistor, diameter 21.5mm, width 6.7mm, pitch 5mm, size 10x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-9 pitch 5mm size 10x8.1mm^2 drill.

New Pull Request

Labels Milestones