synth_tools

Back

Pad); rotate_extrude(convexity = 5, $fn = top_rounding_faces); // Straight basic stem. Cylinder(h = stem_height + nothing, = stem_radius, $fn = sphere_indents_faces); height = 266 + tolerance; extra_depth = 75 + tolerance; // left_panel_width = 40; // widest element is rotary, at 30mm right_panel_width = width_mm - 10 - center_adjust; center_col = width_mm/2; vertical_space = height - v_margin - title_font_size*1.5; saw_out = [output_column, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; square_out = [output_column, row_1, 0]; fm_in = [h_margin+working_width/8, row_2, 0]; cv_2b_atten = [right_col, row_7, 0]; manual_1 = [left_col, row_5, 0]; cv_in_2a = [left_col, row_1, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - thickness*2.2; left_rib_x = thickness * 2; right_rib_x = width_mm - h_margin; input_column = h_margin; bottom_row = v_margin + 12; row_1 = v_margin+12; // draw panel, subtract holes union() { cube([board_width, board_height, thickness]); cylinder(thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cube([cutout_width, cutout_height, thickness+3]); cylinder(h=thickness+standoff_height+3, r=hole_radius, $fn=360); vertex 0 -9 4.51215 vertex 8.99167 0 3 0 ENDBLK 5 21 330 1F 100 AcDbEntity 8 0 100 AcDbBlockEnd 0 BLOCK 5 1C 330 1B 100 AcDbEntity 67 1 8 0 100 AcDbBlockBegin 2 *PAPER_SPACE 1 (min_thickness 0.254) (filled_areas_thickness no min_thickness 0.25) (filled_areas_thickness no From 32ded0979b3a28a6950eb6a371cc2ef88606b4ff Mon Sep 17 00:00:00 2001 Subject: [PATCH] updated README.md updated README.md 40588ba725f2f6c7240cc5d95c2a8af539e27e15 Update README.md 8be0bd80e05e7fe62720d7fda27423a4c75b90a3 Update README.md 3e868f13c4dc33c20ca33a0cc8f51c9d63e1c081 updated C14 footprint, traces, groundplane updated C5 footprint & tracing; schematic annotation update with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 M Series, 6.35mm (1/4in) stereo jack, metal nose with efficient chassis ground connection, T+R normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-au Slim Jacks, 6.35mm (1/4in) stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/ncj10fi-v-0 Combo I series, 3 pole male XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5mbv-b B Series, 4 pole chassis connector, metal housing, vertical PCB mount, https://www.neutrik.com/en/product/nc4mbh B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fav B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbh B Series, 5 pole female XLR receptacle, grounding: separate ground contact connected to shell ground, but not limited to damages for lost profits, loss of .

New Pull Request

Labels Milestones