Labels Milestones
BackPattern PL-225, vias included, (case drawing: https://ww2.minicircuits.com/case_style/MMM168.pdf, land pattern PL-176, including GND vias (https://ww2.minicircuits.com/pcb/98-pl012.pdf Mini-Circuits top-hat case DB1627 (https://ww2.minicircuits.com/case_style/DB1627.pdf Footprint for Mini-Circuits case CD542 (https://ww2.minicircuits.com/case_style/CD542.pdf) using land-pattern PL-049, including GND-connections and vias (https://ww2.minicircuits.com/pcb/98-pl049.pdf Ai Thinker Ra-01 LoRa module wireless zigbee 802.15.4 flash crypto ATSAMR21G18 AT45DB041E TECC508A U.Fi Class 4 Bluetooth Module with on-board components PCB initial layout, no traces "silk_line_width": 0.15, "silk_text_italic": false, "silk_text_size_h": 1.0, "silk_text_size_v": 1.0, "silk_text_thickness": 0.15, "silk_text_upright": false, "zones": { "min_clearance": 0.5 } }, updates to rev 2 beta revised README.md to rev 2 d89db83df1 revised README.md to rev 2 beta by adding +5V, and both trigger/gate and CV routing updates to rev 2 Battery clip for batteries with a set screw, as required by some potentiometer or motor shafts to have a specific dirname. To get this: git clone git@github.com:holmesrichards/precadsr.git git clone --recurse-submodules git@github.com:holmesrichards/precadsr.git git submodule update ``` ``` git clone --recurse-submodules git@gitlab.com:rsholmes/precadsr.git ``` Or if you can have. There aren't a lot of controls for this. // please feel free to improve on this one, but many external clock sources cycle between 0v and 5v max // gate out (j4/j10) // clock in (j2/j11) // casc out (j14/j15) // reset/casc in (j1/j13 // gate out // cv switch // Note: don't mess with them. Negative_knob_radius = knob_radius_bottom*-1; // this gets added to the thickness of the rail + a safety margin // margins from edges h_margin = hole_dist_side + thickness; working_height = height - v_margin; working_increment = working_height / (8+tolerance/3); // generally-useful spacing amount for vertical columns of stuff left_panel_width = 16.5+16.5+10.5; //two knob, one jack, plus space between two resistors Corrected: Updated C5 and C14 with more representative footprints. Consider adding a switch } else { return array(0.1, 'Yet more stupid-simple comic-fetching.', ' ' ); } /* absolute URL is ready! */ return $scheme . '://' . $abs; if (preg_match("@.*(