Labels Milestones
BackOut PCB with on-board components Add correct footprints to fireball 3c7abf2196 Move LED resistors next to transistors to save on panel wires ttrss-plugin- _comics/init.php 334 lines if (strpos($article["link"], "penny-arcade.com") !== FALSE ) { union() { difference() { difference() { difference() { // only keep everything starting at the top surface of the dialhand, from the ages 2 5mm LEDs - 3 x 3 mm, 0.5 mm pitch, ultra thin SMD package; 3 leads; body: 4.3x6.1x0.43mm, https://www.vishay.com/docs/95570/to-277asmpc.pdf 3-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_5_05-08-1635.pdf TSOT, 6 Pin (https://www.ti.com/lit/ds/symlink/sn74auc1g04.pdf#page=24), Solder Mask Defined VSON, 8 Pin (https://www.qorvo.com/products/d/da007268), generated with kicad-footprint-generator LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89004xx, 4 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-A, 16 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-A, 49 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-116, 45Degree (cable under 45degree), 9 pins, pitch 3.5mm, size 11.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block TE 282834-3, 3 pins, pitch 5mm, size 10x8.3mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block TE 1-282834-0, 10 pins, pitch 5mm, size 25x8.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-509 45Degree pitch 5mm size 242x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-10 pitch 5mm size 65x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-9, 9 pins, pitch 2.54mm, hole diameter 0.7mm, wire diameter 1.0mm test point THT pad as test Point, diameter 5.0mm z-position of LED center 1.6mm 2 pins LED diameter 5.0mm THT rectangular pad as test point, loop diameter2.6mm, hole diameter 0.9mm wire loop with bead as test point, pitch 5.08mm, size 15.2x8mm^2, drill diamater.
New Pull Request