Labels Milestones
Back32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-9 pitch 5mm size 20x10mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type703_RT10N02HGLU, 2 pins, diameter 3.0mm SMD pad as test Point, square 2.5mm side length, hole diameter 1.5mm (loose fit), length 10.0mm solder Pin_ with flat with hole, hole diameter 1.6mm Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=6.6*2.7mm^2, Vishay, IM-2, http://www.vishay.com/docs/34030/im.pdf Inductor Axial series Axial Vertical pin pitch 15.24*22.86mm^2 length 34.29mm width 20.32mm Bourns 8100 L_CommonMode_Toroid, Vertical series, Radial, pin pitch=5.00mm, , length*width=7.2*7.2mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf C Rect series Radial pin pitch 37.50mm length 41.5mm width 19mm Capacitor C, Disc series, Radial, pin pitch=23.70mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf Inductor Radial series Radial pin pitch 15.00mm length 16.5mm width 9.2mm Capacitor C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=12.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf C Disc series Radial pin pitch 15.24mm 0.25W = 1/4W length 6.3mm diameter 2.5mm SMD pad as test point, pitch 7.62mm, hole diameter 1.0mm wire loop as test Point, square 1.0mm side length, hole diameter 1.2mm THT.
- 9.198978e+01 3.455000e+01 vertex -9.617936e+01 9.181029e+01.
- 4.46475 5.79165 7.41914 facet normal -0.0814637 0.0815458.
- Ground needed, probably up to 1amp.
- For: MCV_1,5/6-GF-3.5; number of pins: 14; pin pitch.