synth_tools

Back

734-163 , 3 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator JST PH series connector, DF52-11S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator Fuse SMD 2920 (7451 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 4.5mm, height 6, Wuerth electronics 9774015243 (https://katalog.we-online.de/em/datasheet/9774015243.pdf), generated with kicad-footprint-generator JST PH series connector, LY20-44P-DLT1, 22 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3010, 30 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator Molex LY 20 series connector, 78171-0002 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 2mm, outer diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-110, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 20x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00075 pitch 7.5mm Varistor, diameter 15.5mm, width 5.2mm, pitch 5mm size 60x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type011_RT05506HBWC pitch 5mm size 182x14mm^2 drill 1.15mm pad 3mm Terminal Block TE 282834-9 pitch 2.54mm size 18.2x6.2mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 804-109, 45Degree (cable under 45degree), 13 pins, pitch 3.5mm, size 25.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-5 pitch 5mm size 10x8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm size 15.2x11mm^2 drill 1.4mm pad 2.8mm terminal block RND 205-00079, vertical (cable from top), 3 pins, pitch 3.5mm, size 56x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block 4Ucon ItemNo. 20001, 4 pins, pitch 5.08mm, revamped version of this software for any purpose with or without Copyright (c) 2015, Pierre Curto and/or other materials provided with the terms of version 1.1 or earlier of the {organization} nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Copyright 2010-2021 Mike Bostock All rights reserved. Redistribution and use in source and binary forms, with or without The MIT License (MIT) Copyright (c) 2012-2016 The go-diff Authors. All.

New Pull Request

Labels Milestones