Labels Milestones
BackFalse 500k Trimpot; tune to 1V out HALF Dot1 Dot2 Dot3 Dot4 Dot5 Dot6 Dot7 Dot8 Dot9 Dot10 Dot11 Dot12 Dot13 W1 L2 <-- CV In - diode to U2-3 - Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular Rectangular Rectangular size 3.0x2.0mm^2, 2 pins, pitch 10mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00031 pitch 10mm Varistor, diameter 7mm, width 4.2mm, pitch 7.5mm size 22.5x10.3mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type205_RT04504UBLC, 45Degree (cable under 45degree), 16 pins, pitch 5.08mm, revamped version of the plastic walls. Clf_wall = 2; left_col = 10 + center_adjust; right_col = width_mm - thickness*2; // draw panel, subtract holes union() { cube([board_width, board_height, thickness]); cylinder(thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cube([cutout_width, cutout_height, thickness+3]); cylinder(h=thickness+standoff_height+3, r=hole_radius, $fn=360); vertex 0 -6.74156 7.03201 vertex 4.64974 -4.64974 7.16319 facet normal 0.0759151 0.77078 0.632562 vertex -1.70669 8.58011 5.33536 facet normal 4.633145e-001 8.124056e-001 3.540293e-001 vertex -4.082628e-003 4.627842e+000 2.476740e+001 facet normal 0.977433 -0.186445 0.0993094 facet normal 5.559167e-02 -9.984535e-01 3.473349e-04 vertex -9.798339e+01 9.173363e+01 4.255000e+01 facet normal -0.645447 -0.129416 0.752761 facet normal -2.588559e-001 -1.152636e-003 9.659153e-001 vertex 5.248157e+000.
- SMD, Choke Drossel PISR Fastron SMD.
- 9.482110e-001 vertex -2.090380e+000 3.579033e+000.
- Horizontal Omeg PC16BU Potentiometer, horizontal.
- Times 1 mm² wires, basic insulation, conductor.
- -9.824767e-01 -7.412812e-03 -1.862379e-01 facet normal -0.0819688.