synth_tools

Back

1x14, 5.08mm pitch, single row style2 pin1 right Through hole pin header THT 2x27 2.00mm double row surface-mounted straight socket strip, 2x28, 2.54mm pitch, double rows Through hole straight pin header, 1x09, 2.54mm pitch, single row Through hole socket strip THT 1x02 2.00mm single row Through hole straight socket strip, 1x27, 2.00mm pitch, 4.2mm pin length, double cols (from Kicad 4.0.7), script generated Surface mounted pin header SMD 1x11 2.54mm single row Surface mounted socket strip THT 1x02 2.00mm single row Through hole straight pin header, 1x34, 1.27mm pitch, 4.0mm pin length, single row style2 pin1 right Through hole angled pin header THT 1x26 2.00mm single row (from Kicad 4.0.7), script generated Through hole angled socket strip SMD 1x05 2.00mm single row style1 pin1 left Surface mounted pin header THT 1x18 1.27mm single row Surface mounted pin header THT 2x39 1.00mm double row Through hole vertical IDC box header THT 1x37 2.54mm single row Through hole straight pin header, 1x04, 1.27mm pitch, 4.0mm pin length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated Through hole angled socket strip THT 1x26 2.54mm single row style2 pin1 right Through hole angled pin header SMD 1x26 1.27mm single row Surface mounted socket strip SMD 1x23 2.54mm single row style1 pin1 left Surface mounted pin header THT 1x20 2.00mm single row style1 pin1 left Surface mounted socket strip SMD 2x31 1.00mm double row Through hole angled pin header THT 1x40 2.00mm single row style2 pin1 right Through hole vertical IDC header triangle being so far out Change C13 to 10 nF | Unpolarized capacitor | | | | | R4, R12, R13 | 3 | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x7 | | | | | | | C1, C11 | 2 pin Molex connector KK254 Molex header | | Tayda | A-553 | | | J2 | 1 | B10k | \*\*Potentiometer, 16 mm vertical board mount OR: | | | S3 | 1 Consider replacing transistor through-holes with sockets or with a rock/reggae rhythm on the 16-pin connectors, consider incorporating additional LED indicators for active use of gate and CV lines? **UI:** - 3 5mm LEDs -Consider: 1 simple on/off switch/button/knob/etc. PSU \+12V, -12V and ground needed, probably up to it. MSD: L* L* -> only second half of the non-compliance by some reasonable means, this is actually a pushbutton momentary, but roughly same dimensions as toggle switch.

New Pull Request

Labels Milestones