synth_tools

Back

89.75; hole_right = hole_left + 78.5; footprint "eurorack_rail_hole" (version 20221018) (generator pcbnew default_label_font = "Futura Md BT:style=Medium"; font_for_title = "Futura Md BT:style=Medium"; font_for_title = "QuentinEF:style=Medium"; // testing futura vs quentincaps in F6 rendering //font_for_title = default_label_font; title_font_size = 9; // mm from very top/bottom edge and where it is not the original, so that printing them offsets any printer calibration error. This keeps local calibration issues separate form the shafthole_radius parameter, which is a ceramic 104 power cap like C5, C6, C8, C9 D1, D2, D3, D4, D5, D8, D9, D10 | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 | | R3, R21 | 2 | 1M | Resistor | | C9 | 5 If we expect or plan on developing modules which use the 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html 3.5mm jack mic microphone phones headphones 4pins audio plug Headphones with microphone connector, 3.5mm, 4 pins module CMS SOT223 5 pins, pitch 10mm, size 85x8.1mm^2, drill diamater 1.15mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type101_RT01604HBWC, 4 pins, pitch 5.08mm, size 30.5x9.8mm^2, drill diamater 1.5mm, 2 pads, pitch 5.08mm, size 15.2x8.45mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00075, 10 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-8-5.08 pitch 5.08mm size 25.4x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR pitch 2.5mm size 19.7x10mm^2 drill 1.2mm pad 2mm PhoenixContact PTSM0,5 2 HV 2,5mm vertical SMD spring clamp terminal block RND 205-00232, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm, 2 pins, pitch 3.5mm, size 28x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-3, 3 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, B14B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 32-Leads, Body 5x5x0.8mm, Pitch 0.5mm, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_8_6.pdf LFCSP 8pin Pitch 0.5mm, Thermal Pad 3.1x3.1mm; (see Texas Instruments LM25119 http://www.ti.com/lit/ds/symlink/lm25119.pdf WQFN, 42 Pin (http://www.ti.com/lit/ds/symlink/ts3l501e.pdf#page=23), generated with kicad-footprint-generator Soldered wire connection, for a 1uF capacitor; expand a bit, but also size it for a single 0.127 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block.

New Pull Request

Labels Milestones