Labels Milestones
Back236-108, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 30x10.5mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-13-5.08 pitch 5.08mm size 50.8x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-124, 45Degree (cable under 45degree), 11 pins, pitch 7.5mm, size 15x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00291, 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 5 pins, pitch 7.5mm, size 89x15mm^2, drill diamater 1.15mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type205_RT04503UBLC 45Degree pitch 7.5mm size 60x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-144GDT(Ver.14B).pdf LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Schematics/schematic_bugs_v1.md Normal file View File Hardware/Panel/precadsr_panel_al/precadsr_panel_al.pretty/Bigger_Push_Switch_Hole.kicad_mod Normal file Unescape // Depth of the rail + a safety margin center_adjust = 5; //mm center_col = width_mm/2; row_1 = bottom_row + v_margin + 12; //knob_radius top_row = height - v_margin - title_font; saw_out = [output_column, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_3, 0]; cv_in_2b = [right_col, row_2, 0]; pwm_in = [input_column - h_margin/2, row_1, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; c_tune = [second_col, fifth_row, 0]; square_out = [width_mm-h_margin, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [second_col.
New Pull Request