synth_tools

Back

DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 TO-263 / D2PAK / DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/ DPAK TO-252 DPAK-5 TO-252-5 TO-263 / D2PAK / DDPAK SMD package, http://www.onsemi.com/pub/Collateral/ENA2192-D.PDF Analog Devices (Linear Tech), 133-pin LGA uModule, 15.0x15.0x4.32mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf NXP LGA, 8 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/hip2100.pdf#page=13), generated with kicad-footprint-generator Tantalum Capacitor SMD AVX-M (7260-20 Metric), IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator JST PUD series connector, 502585-1070 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-A, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 0.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-208, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 35x8.1mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00248, 9 pins, pitch 5.08mm, size 30.5x8.45mm^2, drill diamater 1.15mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR, vertical (cable from top), 12 pins, pitch 2.54mm, drill diameter 0.8mm wire loop as test Point, diameter 1.5mm THT pad as test Point, diameter 1.0mm, hole diameter 1.3mm, wire diameter 0.5mm test point SMD pad as test point, loop diameter 3.8mm, hole diameter 1.2mm, length 11.3mm, width 2.8mm solder Pin_ with flat fork solder Pin_ diameter 1.3mm, wire diameter 1.0mm test point THT pad as test point, pitch 2.0mm, hole diameter 1.85mm wire loop as test Point, square 2.5mm side length, hole diameter 0.7mm, wire diameter 1.0mm wire loop as test point, loop diameter2.548mm, hole diameter 1.5mm THT pad as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 1.5mm SMD pad as test point, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00291 pitch 5.08mm size 25.4x8.45mm^2 drill 1.1mm pad 2.2mm Terminal Block 4Ucon ItemNo. 10693, vertical (cable from top), 6 pins, pitch 5mm, size 182x14mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00022, 12 pins, pitch 5mm, size 10x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-13-5.08, 13 pins, pitch 5mm, size 10x10.5mm^2, drill diamater 1.2mm, pad diameter.

New Pull Request

Labels Milestones