Labels Milestones
Back2sqmm double-strain-relief Soldered wire connection, for 4 times 0.15 mm² wire, basic insulation, conductor diameter 1.7mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00081 vertical pitch 2.5mm size 18x5mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-407, 45Degree (cable under 45degree), 6 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-5-2.5-V-THR vertical pitch 5mm size 35x10mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10692, 15 pins, pitch 3.5mm, size 43x8.3mm^2, drill diamater 1.5mm, 1 pads, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-102, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 25x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-5 pitch 5mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10698, vertical (cable from top), 12 pins, single row (from Kicad 4.0.7), script generated Through hole angled pin header, 2x08, 2.54mm pitch, 6mm pin length, single row Through hole straight Samtec HPM power header series 11.94mm post length THT 1x01 5.08mm single row Through hole IDC header, 2x20, 2.54mm pitch.
New Pull Request