synth_tools

Back

502494-1470 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.15 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 1.5mm, hole diameter 1.2mm, length 11.3mm, width 2.8mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*3.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 22.50mm length 24mm diameter 7.5mm Fastron 07P Inductor, Radial series, Radial, pin pitch=7.50mm, , diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf C Disc series Radial pin pitch 15.00mm length 16.5mm width 9.2mm Capacitor C, Rect series, Radial, pin pitch=9.00mm, 5W, length*width=14.0*5.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf Resistor Box series Radial pin pitch 20mm length 17mm diameter 6.5mm C, Axial series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf CP Axial series Axial Horizontal pin pitch 2.54mm size 8.08x6.2mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 236-104 45Degree pitch 5mm Varistor, diameter 12mm, width 5.1mm, pitch 7.5mm Varistor, diameter 15.5mm, width 6.4mm, pitch 7.5mm Varistor, diameter 9mm, width 3.3mm, pitch 5mm size 45x12.6mm^2 drill 1.3mm pad 2.5mm terminal block connector http://www.phoenixcontact.com/us/products/1778719/pdf PhoenixContact PTSM0,5 8 HV 2,5mm vertical SMD spring clamp terminal block Metz Connect Type011_RT05506HBWC, 6 pins, pitch 5mm, size 11.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-303, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00084 vertical pitch 5mm size 20x10.5mm^2.

New Pull Request

Labels Milestones