Audio Jack, 2 Poles (Mono / TS) | | R3, R7 | 2 | 1M | Resistor | | Tayda | A-1955 | | | R1, R10, R11 | 3 | A1M | Potentiometer | | Q1, Q2, Q3, Q4, Q5 | 5 | 100nF | Ceramic capacitor | | | | | | Tayda | A-804 | | R24, R26, R28 | 3 | A1M | Potentiometer | | R21, R22, R23 | 3 | 4.7k | Resistor | | | R16, R17, R19, R20 **Potentiometer, 9 mm or 16 mm vertical pots. You can use it instead of latch, https://www.neutrik.com/en/product/nc5fah-0 A Series, Chassis connector Phoenix H male (A series layout), mates with Phoenix MSTB2,5/3-ST, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-v Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd4 M Series, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, efficient chassis ground connection, T+R normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-pre Slim Jacks, 6.35mm (1/4in) jack receptacle, horizontal pcb mount, https://www.neutrik.com/en/product/nlj2md-v speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: without ground/shell contact, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5fbh-b B Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-h-3 speakON Chassis Connectors, 2 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, https://www.neutrik.com/en/product/ncj10fi-v-0 Combo I series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible micro toggle: probably too tight; could work with printed spacers and existing lead lengths alpha pots: tight, only 1/2 turn for nut 11mm - rotary, SR2511 style, with very large range of in-tune response, but comments discuss potential fixes, maybe worth it for a set of default parameters, "); echo(" knurl_wd - [ 1.5.
alt
click/enter