Labels Milestones
Back66x11.2mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3210, 32 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 2.66mm, 0.5 to 0.99 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf Shunt Resistor SMD 4020 (10251 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WDFN, 8 Pin (http://www.macronix.com/Lists/Datasheet/Attachments/7534/MX25R3235F,%20Wide%20Range,%2032Mb,%20v1.6.pdf#page=80), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00236, 6 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360272 size 4x4mm^2 drill 1.5mm pad 3mm single screw terminal block Metz Connect 360273, block size 6x4mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-508, 45Degree (cable under 45degree), 48 pins, pitch 2.5mm, size 7.2x10mm^2, drill diamater 1.5mm, 2 pads, pitch 5.08mm, size 45.7x10.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-308 45Degree pitch 5mm size 15x9mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-309 45Degree pitch.
New Pull Request