Labels Milestones
BackThat system in reliance on consistent application of that diode (also U2-12) to ground to fix tuning range Add 55k-ish resistor to coarse knob (doublecheck this placement). Actual value unclear (see below).
Argument for a single 2.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3.5mm, size 56x7.6mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00305, 9 pins, pitch 5mm, size 15x10mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-109, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 71.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00060 45Degree pitch 5mm size 35x8.1mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00241 pitch 10.2mm size 25.4x8.3mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00030, 9 pins, pitch 3.5mm, size 45.5x7.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MPT-0,5-8-2.54, 8 pins, pitch 7.5mm, size 54.8x14mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-306, 45Degree (cable under 45degree), 1 pins, pitch 3.5mm, size 46.2x7mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal.
- Schematics/shaek_try_1.diy Add kicad schematic, some.
- 5/12-V-7.5-ZB 1719419 Evercom 5301-4P4C RJ9 receptacle, unshielded.
- Diameter 6mm Resistor, Axial_DIN0617.