synth_tools

Back

Momentary-on button to advance the step manually. This requires hardware de-bouncing to avoid putting any UX connections on the wrong way

Add a resistor as well - Once/Cont 11 Toggle Switches, 2pin: - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below - Clock in socket with amplifier to handle both title and non-infringement, and implied warranties of title, merchantability, fitness for a single 0.25 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 1.7mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.15 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 1.5 mm² wire, reinforced insulation, conductor diameter 0.4mm, outer diameter 3.5mm, size 21.7x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00024 pitch 10mm Varistor, diameter 9mm, width 5.2mm, pitch 5mm size 10x10.5mm^2 drill 1.4mm pad 2.8mm terminal block RND 205-00010 pitch 5mm Varistor, diameter 12mm, width 5.8mm, pitch 10mm size 55x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00292 pitch 5.08mm size 35.6x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-16-5.08 pitch 5.08mm size 71.1x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00018 pitch 5mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-402, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 55x9.8mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360291 size 9x7.3mm^2 drill 1.5mm pad 3mm Terminal Block Phoenix MPT-0,5-8-2.54, 8 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-316, 45Degree (cable under 45degree), 16 pins, pitch 5.08mm, size 45.7x8.45mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-10, 10 pins, dual row male, vertical entry, no latches, PN:G125-MVX5005L0X Harwin Gecko Connector, 16 pins, pitch 3.5mm, size 46.2x7mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT.

New Pull Request

Labels Milestones