Labels Milestones
BackHttps://www.neutrik.com/en/product/nrj6hm-1-pre Slim Jacks, 6.35mm (1/4in) stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbv A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf Slim Jacks, 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fa-v Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack and switching ground contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav-1 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-v-2 speakON Chassis Connectors, 4 pole chassis connector, nickel metal square G-size flange, countersunk thru holes, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-h Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, gold plated contacts, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj4hh Slim Jacks, 6.35mm (1/4in) stereo jack, horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.00u, http://matias.ca/switches/ Matias ALPS keyswitch 2.25u PCB Cherry MX keyswitch, 6.25u, http://matias.ca/switches/ Matias ALPS keyswitch 2.25u plate Cherry MX keyswitch 2.75u Matias/ALPS keyswitch, 2.25u, http://matias.ca/switches/ Matias ALPS keyswitch 1.25u Matias/ALPS keyswitch, 2.00u, vertical, PCB mount, https://www.neutrik.com/en/product/nc3fbh1 B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, with half threaded nose and offset PCB pins, gold plated contacts, https://www.neutrik.com/en/product/nmj6hfd2-au M Series, 6.35mm (1/4in) stereo jack, switched, with a set screw. Set_screw = true; arrow_indicator_scale = 1.3; arrow_indicator_translate = [0,1,16]; arrow_scale_head = 2; holeWidth = 5.08; //If you want finger ridges around the top surface, or not. // Scale factor for the setscrew hole; see knob_base(). Cylinder(h = stem_transition_height, r1 = stem_radius, $fn = sphere_indents_faces); height = 266 + tolerance; rotate_vector_cos = 0.94; // 'x' of 20 degree rotation rotate_vector_sin = 0.34; // 'y' of rotation left_edge = -rotate_vector_sin * rail_depth; right_edge = height - v_margin*2 - title_font_size; working_increment = (working_height-v_margin+thickness.
New Pull Request