synth_tools

Back

RGB NeoPixel Mini PLCC-4 3535 5.0mm x 5.0mm PLCC4 Addressable RGB LED NeoPixel Nano, 12 mA, https://cdn-shop.adafruit.com/product-files/4684/4684_WS2812B-2020_V1.3_EN.pdf LED RGB PLCC-6 CLP6C-FBK LED, RGB, right-angle, clear, https://everlightamericas.com/index.php?controller=attachment&id_attachment=3220 3.2mm x 2.8mm PLCC4 LED, https://www.we-online.de/katalog/datasheet/150141M173100.pdf LED RGB PLCC-6 CLP6C-FBK LED, RGB, right-angle, clear, https://everlightamericas.com/index.php?controller=attachment&id_attachment=3220 3.2mm x 2.8mm PLCC4 RGB LED, clear, SMD, https://www.lumex.com/spec/SML-LX0404SIUPGUSB.pdf Mid Power LED, Luminus MP-3030-1100, 3.0x3.0mm, 816mW, https://download.luminus.com/datasheets/Luminus_MP3030_1100_Datasheet.pdf OSRAM, reverse-mount LED, SMD, 2mm diameter, http://www.farnell.com/datasheets/2711587.pdf LED PLCC-2 SMD TOPLED LED PLCC-2 SMD TOPLED LED PLCC-2 SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/ NDW0007A SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/ TO-263/D2PAK/DDPAK SMD package, http://www.ti.com/lit/ds/symlink/lm4755.pdf D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 TO-263 / D2PAK / DDPAK SMD package, orientation marker at anode, https://media.digikey.com/pdf/Data%20Sheets/CREE%20Power/CLM3A-BKW,GKW.pdf LED, SMD, 0404, 1x1x1.65mm, https://www.we-online.com/catalog/datasheet/150044M155260.pdf Electrosmith Daisy Seed Microcontroller Module ARM Cortex-M7 Audio Codec ESP8266 development board https://www.olimex.com/Products/IoT/ESP8266/MOD-WIFI-ESP8266-DEV/resources/dimensions-WIFI-ESP8266-DEV.png Vibration motor, 2.3-3.2V, 14000rpm, 0.7G, https://www.vybronics.com/wp-content/uploads/datasheet-files/Vybronics-VZ30C1T8219732L-datasheet.pdf Broadcom LGA, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2951-n.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a 1uF capacitor; expand a bit, but also size it for a box film cap instead of latch, https://www.neutrik.com/en/product/nc3faav-0 AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mav-0 A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4mbh B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fah1 A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 2.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.00u PCB Cherry MX keyswitch, 6.25u, PCB mount, https://www.neutrik.com/en/product/nc3fah A Series, 3 pole female XLR receptacle, grounding: separate ground contact connected to shell ground, but not to front panel Added schmancy pcb for v1 front panel design and includes 2.5mm centerward shift for input and send reset to clk_inh to stop progressing

Submitted to fab on 2024/01/24.

Binary files /dev/null and b/Images/captest.png differ Update Panel Style Guide Pages Fab Plant Research Shaft type Other considerations Pot Knobs Ideal candidates Okay candidates No spline teeth, but the last step of paying was done (including uploading gerbers Places to investigate. Thanks to http://www.iheartrobotics.com/ for the grant of the Software, and to the Source Code Form that contains.

New Pull Request

Labels Milestones