Labels Milestones
BackHave. There aren't a lot of wiring and increases risk of noise on power rails. Things best left to external modules: CV-controlled CV offset module - add a voltage to another voltage. Useful here for pitching up from a base. UI: 11 potentiometers 13 SPDT switches: // 1 for 5v / 2.5v output mode // 10 steps (sw1-sw10 // 1 rotary switch, 5+ positions 10 LEDs - one per step // 1 for cv glide atten (rv15 // 13 SPDT switches 1 rotary switch, 5+ positions - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off Glide In - diode to U2-3 - Clock rate (B100k) (not sure yet which 2 pins LED, Round, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm 2 pins LED diameter 3.0mm z-position of LED center 6.0mm, 2 pins LED, Round, FlatTop, diameter 3.0mm, 3 pins, pitch 5.08mm, size 15.2x8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-115 45Degree pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00080, vertical (cable from top), 9 pins, pitch 7.5mm, size 89x15mm^2, drill diamater 1.3mm, pad diameter 2mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times.
- 9.961018e+00 facet normal 0.630808 0.768363 0.108162 facet normal.
- 502585-0470 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator Samtec.