Labels Milestones
BackSeries Axial Vertical pin pitch 27.5mm length 22mm diameter 9.5mm C, Axial series, Axial, Horizontal, pin pitch=25.4mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor Axial_Power series Axial Vertical pin pitch 2.50mm diameter 13mm Electrolytic Capacitor CP, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=11mm, Non-Polar Electrolytic Capacitor CP, Radial series, Radial, pin pitch=15.00mm, , length*width=16.5*11.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 18.29mm diameter 27.9mm Vishay IHB-3 Inductor, Radial series, Radial, pin pitch=10.00mm, diameter=24mm, height=40mm, Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf CP Radial_Tantal series Radial pin pitch 7.62mm length 13mm width 3mm Capacitor C, Radial series, Radial, pin pitch=23.10mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf Inductor Radial series Radial pin pitch 75mm length 67mm diameter 29.0mm Electrolytic Capacitor C Rect series Radial pin pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX Dinkle DT-55-B01X Terminal Block WAGO 804-108, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 35x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-9 pitch 5mm size 46.5x15mm^2 drill 1.2mm pad 2mm PhoenixContact PTSM0,5 5 HV 2,5mm vertical SMD spring clamp terminal block connector Terminal Block Phoenix PT-1,5-13-5.0-H pitch 5mm size 182x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-15-3.5-H, 15 pins, pitch 7.5mm, size 119x15mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00292, 7 pins, pitch 10mm, size 25x9mm^2, drill diamater 1.3mm, pad diameter 3mm, see.