Labels Milestones
BackPoE Ethernet Transformer Single SMD RF transformer, 50 ohm, 4.5 to 3000Mhz, https://www.minicircuits.com/pdfs/TC1-1-13M+.pdf WE-AGDT Auxiliary Gate Drive Transformer, 1:1, 8.6x6.7x2.5mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf SMT Gate Drive Transformer, 1.25:1, 10.9x9.7x2.7mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf Current sense transformer, SMD, 14.55x19.91x10.50mm (https://www.coilcraft.com/pdfs/cst2010.pdf Transformer current sense SMD Current sense transformer, SMD, 8.0x8.13x5.3mm (https://www.coilcraft.com/pdfs/cst.pdf Transformer current sense SMD Current sense transformer, SMD, 8.0x8.13x5.3mm (https://www.coilcraft.com/pdfs/cst.pdf Transformer current sense SMD 8.4x7.2mm Ethernet Transformer, Bel S558-5999-T7-F, https://www.belfuse.com/resources/ICMs/lan-/S558-5999-T7-F.pdf Transformer Ethernet SMD, https://www.haloelectronics.com/pdf/discrete-genesus.pdf Halo N2 SO, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator connector wire 2.5sqmm strain-relief Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Connector Phoenix Contact connector footprint for: MC_1,5/12-GF-5.08; number of steps // 5 sockets: // CLOCK out - could be mechanical difficulties using 9 mm. See build notes. *** A-3488 looks similar but is normally closed rather than normally open and will automatically terminate your rights to use, copy, modify, and/or distribute this software except as required by applicable law or treaty, and any other value will taper the knob. [mm] // Rotation offset of all cones. Allows to align the cones with corners of the knob. [mm] setscrew_hole_height = 4.
New Pull Request