Labels Milestones
Back3W, Meanwell, IRM-02, THT, https://www.meanwell.co.uk/media/productPDF/IRM-02-spec.pdf ACDC-Converter, 3W, Meanwell, IRM-03, THT, https://www.meanwell.com/Upload/PDF/IRM-03/IRM-03-SPEC.PDF ACDC-Converter 5W Meanwell IRM-05 ACDC-Converter 10W THT HiLink board mount OR: | | ----- | --- | ---- | ---- | ----------- | ---- | ---- | | | S1 | 1 | B10k | Potentiometer | | | J11 | 1 | SW_SPDT | Switch, single pole normally-open tactile switch 6mm ALPS SKHH right angle tht smd hybrid Harting har-flexicon series connector, LY20-8P-DLT1, 4 Circuits (https://www.molex.com/pdm_docs/sd/2005280040_sd.pdf), generated with kicad-footprint-generator JST XA series connector, S8B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Wuerth WR-WTB series connector, SM11B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 50 Pin (JEDEC MS-013AE, https://www.analog.com/media/en/package-pcb-resources/package/35833120341221rw_28.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, 53780-1070 (), generated with kicad-footprint-generator Harwin Male Horizontal Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89006xx, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size 50x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10700, vertical (cable from top), 8 pins, pitch 7.5mm, size 37.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-108 45Degree pitch 5mm size 182x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-10-3.5-H pitch 3.5mm size 21x7.6mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 51.5x15mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block pitch 10.00mm diameter 24mm height 40mm Electrolytic Capacitor CP, Axial series, Axial, Horizontal, pin pitch=15.24mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf Resistor.
- 2.797160e-03 -5.999519e-01 facet normal 1.575945e-001 2.757905e-001 9.482107e-001.
- Thin shrink small outline package.