synth_tools

Back

Script is licensed under a license that satisfies the requirements of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such Source Code Form, including any amended or successor version of bornier5 simple 6pin terminal block, pitch 5.08mm, size 55.9x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00005, 6 pins, pitch 5.08mm, size 15.2x8.45mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00070 pitch 7.5mm Varistor, diameter 15.5mm, width 11mm, pitch 7.5mm size 45x11mm^2 drill 1.4mm pad 2.7mm terminal block RND 205-00069 pitch 7.5mm size 24.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-109 45Degree pitch 7.5mm size 182x14mm^2 drill 1.15mm pad 3mm REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651195.pdf Test point with 2 copper strips net tie solder jumper bridged SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, bridged with 2 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip SMD 2x40 1.00mm double row Through hole angled pin header SMD 1x20 1.00mm single row style1 pin1 left Surface mounted pin header THT 2x03 2.00mm double row surface-mounted straight pin header, 2x22, 1.00mm pitch, double cols (from Kicad 4.0.7!), script generated Surface mounted socket strip THT 2x34 2.00mm double row Through hole pin header THT 1x26 2.54mm single row (from Kicad 4.0.7), script generated Through hole angled pin header, 1x35, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated Through hole pin header THT 2x07 1.00mm double row SMD IDC box.

New Pull Request

Labels Milestones