Labels Milestones
BackPlaced because it is safe to put reinforcing walls; i.e. The thickness of the base panel's thickness to account for margin at edges width = 36; // [1:1:84] v_margin = hole_dist_top*2 + thickness; working_height = height - v_margin - title_font_size*1.5; saw_out = [third_col, third_row, 0]; fm_in = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; cv_in = [first_col, fourth_row, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; square_out = [width_mm-h_margin, row_1, 0]; fm_in = [input_column + h_margin/2, row_1, 0]; saw_out = [output_column, row_1, 0]; fm_in = [h_margin+working_width/8, row_2, 0]; audio_in_2 = [left_col, row_7, 0]; manual_1 = [left_col, row_3, 0]; Panels/luther_triangle_10hp.stl Normal file Unescape Hardware/Panel/precadsr-panel/precadsr-panel.kicad_pcb Normal file Unescape // Width of module (HP) width = 12; // Number of indenting cones. [mm] cone_indents_top_radius = 3.1; // Bottom radius of the stem. [mm] stem_radius = 5; height_of_cylinder_indentations = 12; hole_vdist = 44.5; hole_hdist = 65; hole_diameter = 2; // Website specifies.