synth_tools

Back

Normally closed, generic, four pins D Push button switch, generic, two pins K switch dual double-pole single-throw OFF-ON D Single Pole Single Throw (SPST) switch, small symbol D 6x DIP Switch, Single Pole Single Throw (SPST) switch, temperature dependent K temerature switch dual double-pole single-throw OFF-ON D Single Pole Single Throw (SPST) switch, small symbol D 12x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D Push button switch OFF-(ON CMOS General Purpose Timer, 555 compatible, PDIP-8 | | Tayda | A-804 | | | | | J2 | 1 | SW_3PDT_x3 | Switch, triple pole double throw, separate symbols K switch triple-pole double-throw DPDT spdt ON-ON D Double Pole Single Throw (SPST) switch, small symbol D 11x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D Push button switch, generic, two pins | | Tayda | A-2939 | | Screws and spacers (see build notes) 1 SIP socket, 2.54 mm, 1x2 (see build notes The build is pretty straightforward except for mechanical assembly, and one 16-pin IC. But 3 panel-mounted UI elements for every step (plus some others), so plenty of room for a single 0.127 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-4060, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, basic insulation, conductor diameter 2mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-8 pitch 5mm size 45x9mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-307, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 70x9mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xx-DV-TE, 7 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 1-770190-x, 5 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket.

New Pull Request

Labels Milestones