Labels Milestones
BackISO Enter, http://matias.ca/switches/ Matias ALPS keyswitch 2.25u Matias/ALPS keyswitch, 1.25u, http://matias.ca/switches/ Matias ALPS keyswitch 1.50u Matias/ALPS keyswitch, 1.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 6.25u PCB Cherry MX keyswitch, 2.00u, http://matias.ca/switches/ Matias ALPS keyswitch 6.25u Matias/ALPS keyswitch, 1.50u, PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3mbv-e B Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle switch - 7mm, with 3-4mm extra space micro toggle switch ON-ON | | | Tayda | A-4755 | | R14 | 1 | Synth_power_2x5 | Pin socket, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x4 | | | R3, R21 | 2 | 1N5817 | Schottky Barrier Rectifier Diode, DO-41 D3, D4, D5, D6, D7, D8, D9, D10 Standard switching diode, DO-35 | | | Tayda | A-4349 | | | Tayda | A-3588 | | | | Tayda | A-3486 or A-3487\*\*\* | | | R1, R2 | 2 .../Unseen Servant/Unseen Servant.kicad_sch | 1279 Notes on needed revisions from revision 1: Fix silkscreen misalignment for lower three knobs 4efd2875e8 Replaced accidentally dropped Fine tuning hole. Am totally not using git correctly Latest commits for file.
- Power Jack, 13A, 24V, Panel Mount,Through-hole.
- Switch - 10 - center_adjust; center_col = width_mm/2.
- 1 red LED with left dot Overflow.
- -2.0165 9.14546 vertex 2.69268 2.0165 18.1498.