synth_tools

Back

43045-020x), 1 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py TQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/lmh0074.pdf#page=13), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-16DP-2DSA, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-14DP-2DSA, 7 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator connector JST XH series connector, B12B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0208, 20 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-BE, 29 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0330, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 43045-0421 (alternative finishes: 43045-180x), 9 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-303 45Degree pitch 7.5mm Varistor, diameter 9mm, width 6.1mm, pitch 7.5mm Varistor, diameter 12mm, width 3.9mm, pitch 7.5mm size 29x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 35x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00017 pitch 5mm size 50x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 76.5x15mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-105 45Degree pitch 5mm Varistor, diameter 9mm, width 4.5mm, pitch 7.5mm length 5.1mm diameter 3.1mm C, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series Inductor Axial series Axial Horizontal pin pitch 30.48mm 4W length 20mm diameter 13mm Electrolytic Capacitor CP Radial series Radial pin pitch 12.7mm length 9.5mm diameter 5.2mm Diode, DO-201AD series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=20*8mm^2 Inductor Axial series Axial Horizontal pin pitch 22.50mm length 26.5mm width 10.5mm Capacitor C, Rect series, Radial, pin pitch=5.00mm, , diameter*width=4.3*1.9mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf C Disc series Radial pin pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf From caaf12f2da0fe056d0b625b9c1a860efbae9f4d1 Mon Sep 17 00:00:00 2001 Subject: [PATCH] added the once through idea with commentary by Correcting changed filename in .prl * LEDs in these is supposed to be able to add picture.

New Pull Request

Labels Milestones