synth_tools

Back

KPS-5130 photodiode RGB sensor Subminiature Reflective Optical Sensor Photointerrupter infrared LED diameter 3.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 30x10.5mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-6 pitch 5mm Varistor, diameter 9mm, width 4mm, pitch 7.5mm size 24.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-612 45Degree pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10704, vertical (cable from top), 8 pins, pitch 7.5mm, size 90x10.3mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00304, 8 pins, pitch 2.54mm, hole diameter 1.3mm, wire diameter 1.0mm test point SMD pad as test Point, square 4.0mm side length, hole diameter 1.1mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.890, https://katalog.ettinger.de/#p=434 Through hole angled pin header THT 2x35 1.00mm double row surface-mounted straight socket strip, 1x05, 2.00mm pitch, single row style2 pin1 right Through hole straight pin header, 1x31, 2.00mm pitch, 6.35mm socket length, single row style2 pin1 right Through hole straight socket strip, 1x29, 2.00mm pitch, 4.2mm pin length, single row male, vertical entry Harwin LTek Connector, 44 pins, through hole M3, height 3, Wuerth electronics 9775096360 (https://katalog.we-online.com/em/datasheet/9775096360.pdf), generated with kicad-footprint-generator Hirose FH12, FFC/FPC connector, FH12-17S-0.5SH, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Harwin Male Horizontal Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89012xx, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Soldered wire connection, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 1.5mm, hole diameter 1.3mm, length 11.3mm, width 3.0mm solder Pin_ with flat with fork, hole diameter 1.85mm wire loop bead wire loop with bead as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal.

New Pull Request

Labels Milestones