synth_tools

Back

Step (manual) -- this is good practice, but ho-dang what a mess romps with traces, vias, and net links Schematics/Unseen Servant/fp-info-cache | 1 | 1 Hardware/Panel/precadsr-panel/fp-lib-table | 4 Hardware/PCB/precadsr/precadsr.sch | 472 aoKicad | 1 | SW_SPDT | Switch, single pole double throw, separate symbols Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TSSOP-8/VSSOP-8 Audio Jack, 2 Poles (Mono / TS) | | | | | R4, R12, R13 | 3 | 1nF | Film capacitor | | R8, R10, R12 | 3 | 2_pin_Molex_header | 2 pin 0.6x1mm 0.375mm height package, https://www.ti.com/lit/ml/mpss034c/mpss034c.pdf, https://www.ti.com/lit/ds/symlink/tpd6e05u06.pdf USON, 14 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0137.PDF (T1433-2C)), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/19964.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-401 45Degree pitch 5mm Varistor, diameter 12mm, width 5.4mm, pitch 7.5mm size 119x15mm^2 drill 1.2mm pad 2mm PhoenixContact PTSM0,5 7 2,5mm vertical SMD spring clamp terminal block Metz Connect Type171_RT13704HBWC, 4 pins, pitch 2.54mm, size 13.16x6.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00015, 5 pins, pitch 7.5mm, size 47.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00298 pitch 10mm size 105x8.1mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-3-5.08 pitch 5.08mm 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf Resistor Axial_DIN0204 series Axial Horizontal pin pitch 2.50mm diameter 6.3mm height 7mm with pitch 10mm length 5.1mm diameter 3.1mm C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=12*10.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Horizontal pin pitch 28.50mm diameter 29.8mm muRATA 1400series Inductor.

New Pull Request

Labels Milestones