synth_tools

Back

PCB, vertical BNC RF interface bayonet 50ohm BNC female PCB mount 4 pin, 0.3mm round THT pads Net tie, 2 pin, 2.0mm square SMD pads Net tie, 2 pin, 2.0mm square SMD pads Net tie, 3 pin, 2.0mm square SMD pads Net tie, 4 pin, 1.0mm round THT pads Net tie, 4 pin, 2.0mm square SMD pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 3 pin, 0.3mm round THT pads Net tie, 4 pin, 1.0mm round THT pads Laser Gaming Sensor ADNS-9800 Fiberoptic Transmitter TX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN Fiberoptic Receiver RX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN TSL2550 ambient light sensor, i2c interface, 6-pin chipled package, https://docs.broadcom.com/docs/AV02-2315EN ambient light sensor chipled Broadcom DFN, 6 Pin (http://www.nve.com/Downloads/ab3.pdf), generated with kicad-footprint-generator JST ZE series connector, SM02B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.5mm, size 14x6.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00086 pitch 10mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-112, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 122x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-6-2.5-H-THR pitch 2.5mm size 22.2x10mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR vertical pitch 3.5mm size 8x8.3mm^2 drill 1.3mm pad 2.5mm terminal block connector Terminal Block WAGO 804-304, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PTSM-0,5-5-2.5-H-THR pitch 2.5mm size 22.2x10mm^2 drill 1.2mm.

New Pull Request

Labels Milestones