synth_tools

Back

Connector, https://en.ninigi.com/product/rj45ge/pdf RJ45 vertical connector Molex Micro-Latch side entry Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FH12-18S-0.5SH, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-BE-A, 16 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times 1.5 mm² wire, reinforced insulation, conductor diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-4-5.08 pitch 5.08mm length 13mm width 6.5mm Capacitor C, Rect series, Radial, pin pitch=23.10mm, , diameter=24.1mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 L_Toroid Horizontal series Radial pin pitch 25.10mm diameter 28mm Inductor, Radial series, Radial, pin pitch=37.50mm, , length*width=41.5*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 10.00mm length 11.0mm width 3.5mm solder Pin_ diameter 1.0mm, hole diameter 1.3mm, wire diameter 1.0mm (press fit), length 10.0mm solder Pin_ with flat fork, hole diameter 1.4mm, outer diameter 3.5mm, size 15x8.3mm^2, drill diamater 1.1mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST VH PBT series connector, 53261-0371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole PLCC, 32 pins, 18.4x8mm body (https://www.micron.com/~/media/documents/products/technical-note/nor-flash/tn1225_land_pad_design.pdf, http://www.fujitsu.com/downloads/MICRO/fma/pdfmcu/f32pm25.pdf TSOP I, 28 pins, through hole, DF13-04P-1.25DSA, 4 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.15 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times.

New Pull Request

Labels Milestones