Labels Milestones
Back(nano or uno) + MCP4725 (DAC). ** https://hkadesign.org.uk/monotronkb.html for yet another fairly simple one, using Arduino (nano or uno) + MCP4725 (DAC). ** https://hkadesign.org.uk/monotronkb.html for yet another version Alternative: CV from something else use a 3.5mm drill bit to get 1:1 between schematic and front panel: 9.8mm (alpha pots sliders: 3mm above panel, ample thunkicons: probably too tight; could work with printed spacers and existing lead lengths alpha pots: tight, only 1/2 turn for nut 11mm - rotary, SR2511 style, with very large range of in-tune response, but comments discuss potential fixes, maybe worth it for a single 0.15 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting.
- 25x7.6mm^2, drill diamater 1.3mm.
- QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=38), generated with kicad-footprint-generator.
- 3.531 1.251 (end 3.531 1.251 (end 3.531.
- Size 25.4x11.2mm^2, drill diamater 1.3mm, pad.
- Pitch=30.48mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor.