synth_tools

Back

Jacks, 6.35mm (1/4in) stereo jack, switched, with full threaded nose, https://www.neutrik.com/en/product/nsj12hf-1 Stacking Jacks, Mono dual jack, full nose, https://www.neutrik.com/en/product/nsj8hc Stacking Jacks, Stereo dual jack, quick fix nose, https://www.neutrik.com/en/product/nsj8hl Stacking Jacks, Mono dual jack, half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 M Series, 6.35mm (1/4in) stereo jack, unswitched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1-au Slim Jacks, 6.35mm (1/4in) stereo jack, vertical PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh1-e B Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh2-da B Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh2-b B Series, 3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fav2 A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 6.25u plate Cherry MX keyswitch, 1.75u, http://matias.ca/switches/ Matias ALPS keyswitch 2.25u PCB Cherry MX keyswitch, 2.00u, vertical, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 6.25u Matias/ALPS keyswitch, 1.50u, PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbhr-b B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl-0 A Series, 5 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3maah-1 AA Series, 3 pole male XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/ncj9fi-h-0 Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbv-b B Series, 5 pole male XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fi-v-0 Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of the flat side (in mm). (ShaftLength must be sufficiently detailed for a single 1 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.2mm, height.

New Pull Request

Labels Milestones