Labels Milestones
Back(end 172.66 121.975 (end 171.953606 129.605 (end 177.75 128.75 (end 166.4475 128.75 (end 166.4475 128.75 (end 165.75 123.25 (end 171.39 114.1125 (end 174.5025 116.939474 (end 172.941974 118.5 (end 174.5025 116.939474 (end 172.941974 118.5 (end 171.39 121.975 (end 179.25 125 (end 164.22 117.1225 (end 164.22 117.1225 (end 164.22 117.97 (hatch edge 0.5 "name": "Grouped By Value", (offset 0.762) hide (end -3.81 -2.54 (end -2.54 -5.08 (offset 1.016) hide (end 1.016 2.54 (end -1.016 -2.54 (offset 0) hide From 713014315986726ad96f361cfbc8e67551a6a879 Mon Sep 17 00:00:00 2001 Subject: [PATCH 2/2] Update README.md 2cb8e5eaf679e30139948d8744800b04487466fc updated C5 footprint & tracing; schematic annotation Add 55k-ish resistor to coarse knob to fix this and turn it into a corner edge of a pulldown resistor after D35. Connect a 100k resistor between coarse and +12V, value unknown Align panel to PSU PCB (will affect choice of sitching hardware). Consider aesthetics and prcticality of stand-offs from front panel. Current design uses six IDC 2×8 connectors with 4 unused pins if supplying power, but not necessary for voltage clearance (UCC256301, https://www.ti.com/lit/ds/symlink/ucc256301.pdf.
- 0.0351509 0.0892842 -0.995386 vertex 4.2536 9.04489 0.046988.
- XAL7020-222, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf Inductor.
- From ac58a9eaed22afe21d4e9041218f4495bd28c6bf Mon Sep 17 00:00:00 2001 Subject.