synth_tools

Back

The two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 6.0mm, 2 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-116, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 36.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00009, 10 pins, pitch 5mm, size 50x9.8mm^2, drill diamater 1.1mm, pad diameter 2.4mm, outer diameter 3.5mm, size 46.2x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 12 pins, pitch 5.08mm, size 30.5x10.6mm^2, drill diamater 1.4mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Philmore , 2 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Molex Mini-Fit Sr. Power Connectors, old mpn/engineering number: 5569-14A1, example for new mpn: 39-28-x22x, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator JST GH series connector, 502382-1170 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 2.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-15, 15 pins, pitch 7.5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Philmore THT Terminal.

New Pull Request

Labels Milestones