synth_tools

Back

S26B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator TE, 826576-7, 7 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 32 Pin (https://www.st.com/resource/en/datasheet/stm32g071k8.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type101_RT01605HBWC, 5 pins, pitch 5.08mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test Point, square 4.0mm side length, hole diameter 0.5mm test point SMD pad as test point, loop diameter2.548mm, hole diameter 0.7mm THT rectangular pad as test Point, square 2.5mm side length, hole diameter 1.2mm, length 11.3mm, width 3.0mm solder Pin_ diameter 1.0mm, wire diameter 1.0mm test point THT pad rectangle square SMD pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 2 pin, 2.0mm square SMD pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 2 pin, 1.0mm round THT pads Laser Gaming Sensor ADNS-9800 Fiberoptic Transmitter TX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN Fiberoptic Receiver RX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN TSL2550 ambient light sensor, i2c interface, 6-pin chipled package, https://docs.broadcom.com/docs/AV02-2315EN ambient light sensor, i2c interface, 6-pin chipled package, https://docs.broadcom.com/docs/AV02-2315EN ambient light sensor, https://www.kingbright.com/attachments/file/psearch/000/00/00/KPS-3227SP1C(Ver.16).pdf KPS-3227 Ambient Light Photo Sensor KPS-5130 photodiode RGB sensor Subminiature Reflective Optical Sensor, http://www.kingbright.com/attachments/file/psearch/000/00/00/KRC011(Ver.15).pdf Subminiature Reflective Optical Sensor Photointerrupter infrared LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00054 pitch 5mm size 56.5x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR, 7 pins, pitch 2.5mm, size 20.5x5mm^2, drill diamater 1.3mm.

New Pull Request

Labels Milestones