Labels Milestones
Back[PATCH 04/18] adds front panel design and includes 2.5mm centerward shift for input and output jacks triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; square_out = [width_mm-h_margin, row_1, 0]; pwm_in = [first_col, fourth_row, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; triangle_out = [output_column, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_2, 0]; pwm_in = [input_column - h_margin/2, row_1, 0]; fm_pot = [input_column + h_margin/2, bottom_row, 0]; fm_in = [input_column - h_margin/2, bottom_row, 0]; pwm_duty = [input_column, row_2, 0]; f_tune = [second_col, fourth_row, 0]; //Fifth row interface placement square_out = [third_col, fourth_row, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_6, 0]; audio_in_1 = [left_col, row_5, 0]; audio_out_1 = [right_col, row_2, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_4, 0]; left_rib_x = thickness + 6 + tolerance; // left_panel_width = 12.5*3 + tolerance*4 + 8; //three knobs plus space between two resistors Corrected: Updated C5 and C14 with more panel layout ideas Experimenting with more panel layout ideas working_height = height - hole_dist_top); echo("Putting a hole for mounting screw: ISO 1481-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1755545 12A || order number: 1843619 8A 160V Generic Phoenix Contact connector footprint for: MSTBA_2,5/11-G-5,08; number of pins: 05; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) .
- Https://www.neutrik.com/en/product/nrj6hm-1-pre Slim Jacks, 6.35mm (1/4in) stereo jack, switched.
- HLE-109-02-xxx-DV-BE, 9 Pins per.